Go to Mustangs Home Page
Go to Trucks Home Page
| 1979-1986 Hoods |
|
Lift Off Cowl Hood 5 Inch Rise
fits 1979-1983 Mustangs |
Part# LO 601 50 |
|
Rise/Height: 5 inches Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: LO 601 50 Cost of Hood: $199.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $324.95 (No Credit Card Fees!!) Description: Single wall Lift Off/Pin On hood, needs Hood Pins Part# HPI 700 |
![]() Side View |
![]() Top View |
|
![]() Inside View | |
|
Cowl Hood 2.5 Inch Rise
fits 1979-1986 Mustangs |
Part# CH 601 25 CH 602 25 |
|
Rise/Height: 2.5 inches Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: CH 601 25 ('79-'83) Part#: CH 602 25 ('84-'86) Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# LO 601 25 ('79-'83)**** ********LO 602 25 ('84-'86)****** Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
|
Cowl Hood 4.0 Inch Rise
fits 1979-1986 Mustangs |
Part# CH 601 40 CH 602 40 |
|
Rise/Height: 4.0 inches Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: CH 601 40 ('79-'83) CH 602 40 ('84-'86) Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# LO 601 40 ('79-'83)**** ********LO 602 40 ('84-'86)****** Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
|
Extended Lift Off Racing Hood 5" Rise
fits 1979-1986 Mustangs |
Part# LO 601 50 EXT LO 602 50 EXT |
|
Rise/Height: 5.0 inches Weight: Approximately 15 pounds Material: Hand laid fiberglass. Part#: LO 601 50 EXT ('79-'83) LO 602 50 EXT ('84-'86) Cost of Hood: $229.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $354.95 (No Credit Card Fees!!) Description: Lift Off Racing Hood, 5" tall, extended, comes all the way to windshield. Single sided, finished on top. These hoods are lift-off or pin-on Hood Pins available (Part# HPI 700). .
|
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
|
Lift Off Cowl Hood 6 Inch Rise
fits 1979-1986 Mustangs |
Part# LO 601 60 LO 602 60 |
|
Rise/Height: 6.0 inches Weight: Approximately 15 pounds Material: Hand laid fiberglass. Part#: LO 601 60 ('79-'83) LO 602 60 ('84-'86) Cost of Hood: $199.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $324.95 (No Credit Card Fees!!) Description: Lift Off Racing Hood, 6" tall. Single sided, finished on top. These hoods are lift-off or pin-on. Hood Pins available (Part# HPI 700). |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
|
XE Hood Scoop fits 1979-1993 Mustangs |
Part# XE 500 HS |
![]() Rise/Height: 1.5 inches Weight: Approximately 3 pounds Material: Urethane Part#: XE 500 HS Total Cost: $169.95 (shipping and Handling Fee Included) Description: Urethane Add-on Hood Scoop. Simply adds onto Factory Hoods or ABC Cowl Hoods.
|
|
| 1987-1993 Hoods |
Cowl Hood 1.5 Inch Rise
fits 1987-1993 Mustangs |
Part# CH 700 15 | ||
Rise/Height: 1.5 inches Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: CH 700 15 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# LO 700 15**** Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
||
![]() Top View |
|||
![]() Inside View | |||
Cowl Hood 2.75 Inch Rise
fits 1987-1993 Mustangs |
Part# CH 700 30 | ||
Rise/Height: 2.75 inches Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: CH 700 30 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# LO 700 30**** Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
||
![]() Top View |
|||
![]() Inside View |
|||
Cowl Hood 4.0 Inch Rise
fits 1987-1993 Mustangs |
Part# CH 700 40 | ||
Rise/Height: 4.0 inches Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: CH 700 40 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# LO 700 40**** Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
||
![]() Top View |
|||
![]() Inside View |
|||
Lift Off Cowl Hood 5.0 Inch Rise
fits 1987-1993 Mustangs |
Part# LO 700 50 | ||
Rise/Height: 5.0 inches Weight: Approximately 15 pounds Material: Hand laid fiberglass. Part#: LO 700 50 Cost of Hood: $199.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $324.95 (No Credit Card Fees!!) Description: Single sided, smooth finish top. These Hoods are mostly for racing use, Hood Pins are strongly recommanded. |
![]() Side View |
||
![]() Top View |
|||
Cowl Lift Off Hood 6.5 Inch Rise
fits 1987-1993 Mustangs |
Part# LO 700 65 | ||
|
Rise/Height: 6.5 inches Weight: Approximately 20 pounds Material: Hand laid fiberglass. Part#: LO 700 65 Cost of Hood: $199.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $324.95 (No Credit Card Fees!!) Description: Lift Off Racing Hood, 6.5" tall. Single sided, finished on top. These hoods are lift-off or pin-on. Hood Pins available (Part# HPI 700). |
![]() Side View |
||
![]() Top View |
|||
![]() Inside View |
|||
Extended Lift Off Racing Hood 5.5" Rise
fits 1987-1993 Mustangs |
Part# LO 700 55 EXT | ||
![]() Rise/Height: 5.5 inches Weight: Approximately 15 pounds Material: Hand laid fiberglass. Part#: LO 700 55 EXT Cost of Hood: $229.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $354.95 (No Credit Card Fees!!) Description: Lift Off Racing Hood, 5.5" tall, extended all the way to windshield. Single sided, finished on top. These hoods are lift-off or pin-on Hood Pins available (Part# HPI 700). .
|
![]() Side View |
||
![]() Top View |
|||
![]() Inside View |
|||
MACH 1 Hood 1.5 Inch Rise
fits 1987-1993 Mustangs |
Part# MA 700 15 | ||
Rise/Height: 1.5 inches Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: MA 700 15 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# MA 700 15 LO**** Description: Two scoops (closed) at front. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
||
![]() Top View |
|||
![]() Inside View |
|||
MACH 1 Hood 2.5 Inch Rise
fits 1987-1993 Mustangs |
Part# MA 700 25 | ||
![]() Rise/Height: 2.5 inches Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: MA 700 25 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# MA 700 25 LO**** Description: Two scoops (closed) at front. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
||
![]() Top View |
|||
![]() Inside View |
|||
MACH 3 Hood 2.5 Inch Rise
fits 1987-1993 Mustangs |
Part# MA-3 700 | ||
![]() Rise/Height: 2.5 inches Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: MA-3 700 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# MA-3 700 LO**** Description: One large center scoop and one scoop on each side. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
||
![]() Top View |
|||
![]() Inside View |
|||
Cobra RR700 Hood 2.5 Inch Rise
fits 1987-1993 Mustangs |
Part# RR 700 | ||
Rise/Height: 2.5 inches Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: RR 700 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# RR 700 LO**** Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
||
![]() Top View |
|||
![]() Inside View |
|||
Cobra SVO 700 Hood 2.5 Inch Rise
fits 1987-1993 Mustangs |
Part# SVO 700 | ||
Rise/Height: 2.5 inches over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: SVO 700 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# SVO 700 LO**** Description: Cobra R style with SVO scoop (closed) on top. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
||
![]() Top View |
|||
![]() Inside View |
|||
CR700 R2000 Hood
fits 1987-1993 Mustangs |
Part# CR 700 R2000 | ||
![]() ![]() Rise/Height: 2.5 inches Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: CR 700 R2000 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# CR 700 R2000 LO**** Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
||
![]() Top View |
|||
![]() Inside View |
|||
Black Widow 700 Hood
fits 1987-1993 Mustangs |
Part# BW 700 | ||
Part#: BW 700 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# BW 700 LO**** Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
||
![]() Top View |
|||
![]() Inside View |
|||
|
Hood Pins (1 pair)
fits all Mustangs |
Part# HPI 700 Price: $17.95 |
||
|
Part#: HPI 700 Price: $17.95 S & H Charge: $10.00 Description: Chrome Hood Pins, sold in pairs. |
![]() |
||
|
Head Lamp Panel
fits 1987-1993 Mustangs |
Part# HLAP 700 Price: $89.95 |
||
|
Part#: HLAP 700 Price: $89.95 S & H Charge: $25.00 Description: Head Lamp panel for 1987-1993 Mustangs. ![]() |
![]() |
||
|
Custom Cowl Vent Cover
fits 1979-1993 Mustangs |
Part# CVEN 700 CU Price: $99.95 |
||
|
Part#: CVEN 700 CU Price: $99.95 S & H Charge: $25.00 Description: Custom Cowl Vent Cover, replaces factory vent cover for 1979-1993 Mustangs. ![]() |
![]() |
||
|
OE Cowl Vent Cover
fits 1979-1993 Mustangs |
Part# CVEN 700 OE Price: $69.95 |
||
|
Part#: CVEN 700 OE Price: $69.95 S & H Charge: $25.00 Description: OE Cowl Vent Cover for 1979-1993 Mustangs. ![]() |
![]() |
||
|
Smooth Cowl Vent Cover
fits 1979-1993 Mustangs |
Part# CVEN 700 SM Price: $99.95 |
||
|
Part#: CVEN 700 SM Price: $99.95 S & H Charge: $25.00 Description: Smoke Cowl Vent Cover for 1979-1993 Mustangs. ![]() |
![]() |
||
|
XE Hood Scoop fits 1979-1993 Mustangs |
Part# XE 500 HS | ||
![]() Rise/Height: 1.5 inches Weight: Approximately 3 pounds Material: Urethane Part#: XE 500 HS Total Cost: $169.95 (shipping and Handling Fee Included) Description: Urethane Add-on Hood Scoop. Simply adds onto Factory Hoods or ABC Cowl Hoods.
|
|
| 1994-1998 Hoods |
Cobra RR 800 Hood 2 Inch Rise
fits 1994-1998 Mustangs |
Part# RR 800 20 |
![]() Rise/Height: 2 inches over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: RR 800 20 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# RR 800 20 LO**** Description: Cobra R style hood. 2 inches over factory hood. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Cobra RR 800 Hood 3 Inch Rise
fits 1994-1998 Mustangs |
Part# RR 800 30 |
![]() Rise/Height: 3 inches over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: RR 800 30 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# RR 800 30 LO**** Description: Cobra R style hood but taller. 3 inches over factory hood. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Custom RS 800 Hood 2 Inch Rise
fits 1994-1998 Mustangs |
Part# RS 800 |
Rise/Height: 2.0 inches Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: RS 800 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# RS 800 LO**** Description: Custom hood with scoops in the middle at front, 2 inches over factory hood. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Cobra SS 800 Hood
fits 1994-1998 Mustangs |
Part# SS 800 |
![]() Rise/Height: Same as Factory Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: SS 800 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# SS 800 LO**** Description: Custom hood with scoops on sides, not higher than factory hood. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Cobra SVO 800 Hood 2.5 Inch Rise
fits 1994-1998 Mustangs |
Part# SVO 800 |
![]() Rise/Height: 2.5 inches over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: SVO 800 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# SVO 800 LO**** Description: Cobra R Style hood with SVO scoop. 2.5 inches over factory hood. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
CR800 R2000 Hood V1
fits 1994-1998 Mustangs |
Part# CR 800 R-2000 V1 |
![]() Rise/Height: 2.0 inches over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: CR 800 R-2000 V1 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# CR 800 R-2000 LO**** Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
CR800 R2000 Hood V2
fits 1994-1998 Mustangs |
Part# CR 800 R-2000 V2 |
![]() Rise/Height: 3.0 inches over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: CR 800 R-2000 V2 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# CR 800 R-2000 V2 LO**** Description: Same design as V1 but 1" taller.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Black Widow 800 Hood
fits 1994-1998 Mustangs |
Part# BW 800 |
![]() Rise/Height: 2.5 inches over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: BW 800 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# BW 800 LO**** Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
SLN 800 Hood
fits 1994-1998 Mustangs |
Part# SLN 800 |
![]() Rise/Height: Factory height Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: SLN 800 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# SLN 800 LO**** Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware. NOTE: Hood vents are available (part# HVE800). Customers can re-use the vents from the factory hood.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Cowl Hood 3 Inch Rise
fits 1994-1998 Mustangs |
Part# CH 800 30 |
![]() Rise/Height: 3" over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass Part#: CH 800 30 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# CH 800 30 LO**** Description: Custom hood with cowl scoop in the middle, 3 inches total hight. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Cowl Hood 4.5 Inch Rise
fits 1994-1998 Mustangs |
Part# CH 800 45 |
![]() Rise/Height: 4.5" over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass Part#: CH 800 45 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# CH 800 45 LO**** Description: Custom hood with cowl scoop in the middle, 4.5 inches total hight. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
MACH-2 800 Hood 2.5 Inch Rise
fits 1994-1998 Mustangs |
Part# MA-2 800 |
![]() Rise/Height: 2.5" over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass Part#: MA-2 800 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# MA-2 800 LO**** Description: Custom hood with scoops in the middle at front, 2.5 inches over factory hood. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
MACH-3 800 Hood 2.5 Inch Rise
fits 1994-1998 Mustangs |
Part# MA-3 800 |
![]() Rise/Height: 2.5 inches over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass Part#: MA-3 800 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# MACH-3 800 LO**** Description: One large center scoop and one scoop on each side. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
|
AGE 800 Hood fits 1994-1998 Mustangs ![]() |
Part# AGE 800 |
![]() Rise/Height: 3.0 inches over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: AGE 800 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# AGE 800 LO**** Description: Cobra RR hood with 2 Cobra Style Vents. 3 inches over factory hood. Designd for 94-98 Mustangs. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
|
XE Hood Scoop fits 1994-1998 Mustangs |
Part# XE 500 HS |
![]() Rise/Height: 1.5 inches Weight: Approximately 3 pounds Material: Urethane Part#: XE 500 HS Total Cost: $169.95 (shipping and Handling Fee Included) Description: Urethane Add-on Hood Scoop. Simply adds onto Factory Hoods or ABC Cobra R or Cobra RR Hoods.
|
|
|
Head Lamp Panel
fits 1994-1998 Mustangs |
Part# HLAP 800 Price: $89.95 |
|
Part#: HLAP 800 Price: $89.95 S & H Charge: $25.00 Description: Head Lamp panel for 1994-1998 Mustangs. ![]() |
![]() |
| 1999-2004 Hoods |
Cobra R2000 Hood 2.5 Inch Rise
fits 1999-2004 Mustangs |
Part# CR 900 R-2000 |
Rise/Height: 2.5 inches Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: CR 900 R-2000 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# CR 900 R-2000 LO**** Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Cobra RR 900 Hood 2.5 Inch Rise
fits 1999-2004 Mustangs |
Part# RR 900 25 |
Rise/Height: 2.5" over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: RR 900 25 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# RR 900 25 LO**** Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Cobra RR 900 Hood 4 Inch Rise
fits 1999-2004 Mustangs |
Part# RR 900 40 |
Rise/Height: 4" over factoryWeight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: RR 900 40 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# RR 900 40 LO**** ![]() Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Cobra SVO 900 Hood 2.5 Inch Rise
fits 1999-2004 Mustangs |
Part# SVO 900 |
Rise/Height: 2.5 inches over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: SVO 900 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# SVO 900 LO**** Description: Cobra Style hood with SVO scoop. 2.5 inches over factory hood. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Black Widow 900 Hood
fits 1999-2004 Mustangs |
Part# BW 900 |
![]() Rise/Height: 2.5 inches over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: BW 900 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# BW 900 LO**** Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Cowl Hood 3" Rise
fits 1999-2004 Mustangs |
Part# CH 900 30 |
![]() Rise/Height: 3 inches over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass Part#: CH 900 30 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# CH 900 30 LO**** Description: Custom hood with cowl scoop in the middle, 3 inches total hight. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
MACH-2 900 Hood 1.5 Inch Rise
fits 1999-2004 Mustangs |
Part# MA-2 900 |
Rise/Height: 1.5 inches over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: MA-2 900 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# MA-2 900 LO**** Description: Custom hood with scoops in the middle at front, 2 inches over factory hood. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
MACH-3 900 Hood 2.5 Inch Rise
fits 1999-2004 Mustangs |
Part# MA-3 900 |
![]() Rise/Height: 2.5 inches over factory Weight: Approximately 27 pounds Material: Hand laid fiberglass. Part#: MA-3 900 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# MA-3 900 LO**** Description: One large center scoop and one scoop on each side. Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
SLN 900 Hood
fits 1999-2004 Mustangs |
Part# SLN 900 |
Rise/Height: Factory HeightWeight: Approximately 17 pounds Material: Hand laid fiberglass. Part#: SLN 900 Total Cost: $529.95 (shipping and Handling Fee Included) **NON ABC Item, Ship from factory** (Additional Shipping Fee may apply to NY City and some other areas) Description: Very Light Weight Fiberglass Saleen style hood, to fit all 1999-04 Mustangs. Heat retraction hood with screened openings. These hoods are bolt-on using factory hardware.
![]() Reinforced at the hinges and latching point. Screens at rear. |
|
![]() Top View |
|
![]() Inside View |
|
Cobra 03 (Heat Retraction) Style Hood
fits 1999-2004 Mustangs |
Part# C-03 900 |
Rise/Height: Factory HeightWeight: Approximately 25 pounds Material: Hand laid fiberglass. Part#: C-03 900 Cost of Hood: $249.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $374.95 (No Credit Card Fees!!) **Also available as Lift Off $199.95** ****Part# C-03 900 LO**** Description: Fiberglass 03 Cobra style (Heat Retraction) hood, just like factory but made to fit all 1999-04 Mustangs. Heat retraction hood with openings for factory vents available through ABC part# HVE 900 CO.
These hoods are bolt-on using the factory hardware. (This hood will not fit well with original Ford Cobra 03 Front Bumper, but will fit with ABC Cobra 03 Front Bumper.)
![]() Reinforced at the hinges and latching point. Screens at rear. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Xenon Hood Scoops
fits 1999-2004 Mustangs |
Part# XE 900 HS |
Material: Urethane Part#: XE 900 HS Total Cost: $169.95 (shipping and Handling Fee Included) Description: Xenon Hood Scoops, stick-on part, designed for 99-04 Mustangs. |
|
| 2005-2009 Hoods |
Shelby Style Hood Dual Function Hood
fits 2005-2010 Mustangs |
Part# SHE 500 H Price: $329.95 |
Rise/Height: Approx. 1.5" Weight: Approx. 25 lb. Material: Hand laid fiberglass. Part#: SHE 500 H Price: $329.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $454.95 (No Credit Card Fees!!) **Also available as Lift Off $229.95** ****Part# SHE 500 LO**** Description: This is a dual functional hood, heat retraction and ram air. On top of the hood are two areas with open vents, this retracts the heat out of the engine compartment. At the front the hood has two openings with aluminum screens to direct the outside air towards the air filter. The hoos is a double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware. Comes in white gel coat finish.
![]() |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Boss/Eleanor Style Hood 2" Rise
fits 2005-2009 Mustangs |
Part# ELE 500 |
![]() Rise/Height: 2" Rise Weight: Approximately 25 lb. Material: Hand laid fiberglass. Part#: ELE 500 Cost of Hood: $299.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $424.95 (No Credit Card Fees!!) **Also available as Lift Off $229.95** ****Part# ELE 500 LO**** Description: Double Wall Fiberglass Boss/Eleanor style hood, to fit all 2005-2009 Mustangs. Nice smooth inside for show quality. These hoods are bolt-on using the factory hardware. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Cowl Hood 4" Rise
fits 2005-2009 Mustangs |
Part# CH 500 40 |
Rise/Height: 4" rise Weight: Approx. 27 lb. Material: Hand laid fiberglass. Part#: CH 500 40 Cost of Hood: $299.95 S & H Charge: $125.00 (Except NY City and some other areas) Total Cost: $424.95 (No Credit Card Fees!!) **Also available as Lift Off $229.95** ****Part# CH 500 40 LO**** Description: Double sided, smooth finish on both sides. These hoods are bolt-on using the factory hardware. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
Hot Wheels Style Hood
fits 2005-2009 Mustangs |
Part# H/W 500 |
|
Rise/Height: Factory Height Weight: Approximately 17 lb. Material: Hand laid fiberglass. Part#: H/W 500 Total Cost: $529.95 (shipping and Handling Fee Included) **NON ABC Item, Ship from factory** (Additional Shipping Fee may apply to NY City and some other areas) Description: Very Light Weight Fiberglass Hot Wheels style hood, comes in black finish to fit all 2005-2009 Mustangs. Heat retraction hood with screened openings.. These hoods are bolt-on using the factory hardware. |
|
![]() Top View |
|
![]() Inside View |
|
MACH-2 Hood
fits 2005-2009 Mustangs |
Part# MA-2 500 |
|
Rise/Height: Factory hight Weight: Approximately 20 lb. Material: Hand laid fiberglass. Part#: MA-2 500 Total Cost: $529.95 (shipping and Handling Fee Included) **NON ABC Item, Ship from factory** (Additional Shipping Fee may apply to NY City and some other areas) Description: Nice styling hand laid fiberglass hood. Very smooth double wall finish inside. Fits all '05-'09 Mustangs. These hoods are bolt-on using the factory hardware. |
![]() Side View |
![]() Top View |
|
![]() Inside View |
|
|
Hood Scoop - Small fits 2005-2009 Mustangs |
Part# SD 500 HS |
|
Part#: SD 500 HS
Total Price: $119.95 (Shipping & Handling included) Material: ABS Plastic. Description: Small Hood Scoop, add-on part, Bolt-on application, template and hardware are provided. Designed for '05-'09 Mustangs.
|
|
|
Hood Scoop - Medium fits 2005-2009 Mustangs |
Part# XE 500 HS |
|
Part#: XE 500 HS Total Cost: $129.95 (Shipping & Handling Included) Material: Urethane Description: Medium Hood Scoop, add-on part, designed for 2005-2009 Mustangs.
|
|
|
Hood Scoop - Large fits 2005-2009 Mustangs |
Part# 3D 500 HS |
Part#: 3D 500 HSTotal Cost: $229.95 (Shipping & Handling Included) Material: Urethane Description: Large Hood Scoop, add-on part, designed for '05-'09 Mustangs. Decals for the vents are provided.
|
|
Back to Mustangs Home Page
Trucks Home Page
© copyright 2010 ABC Exclusive Auto, All Rights Reserved